Disclosure: As an Amazon Associate, we may earn from qualifying purchases. This does not affect the price you pay or our product recommendations.
Introduction – When Your Stand Mixer Suddenly Stops Working
A stand mixer that suddenly stops turning, struggles under load, or makes grinding noises can be incredibly frustrating—especially when the motor still runs.
In many Whirlpool 5Qt & 6Qt stand mixers, this issue is not the motor itself but a worn or stripped worm gear system. The good news? You usually don’t need a brand-new mixer.
The Worm Gear Kit (9709231, 9703445, 9706529, 9709511, 9703680) is designed to replace the internal drive components and restore your mixer’s performance at a fraction of the cost of replacement.
👉 Learn more about the Whirlpool Stand Mixer Worm Gear Kit on Amazon
What’s Included in the Kit
This is not just a single replacement gear—it’s a complete internal repair kit, which makes a big difference for long-term reliability.
Included parts:
-
9709231 Worm Gear
-
9703445 Bearing
-
9706529 Gear
-
9709511 Gasket
-
9703680 Circlip
-
1.8 oz Food-Grade Grease
✅ Designed to work with Whirlpool 5Qt & 6Qt stand mixers
✅ Food-grade grease ensures safe, smooth operation after repair
Why Worm Gears Fail in Stand Mixers
Stand mixers are designed with a sacrificial gear system. The worm gear is meant to fail first to protect the motor when the mixer is overloaded.
Common causes of failure include:
-
Mixing very stiff doughs
-
Long mixing sessions at high speed
-
Age-related wear
-
Lack of lubrication
When the worm gear strips, the motor may still run, but the bowl attachment stops spinning—or spins inconsistently.
Build Quality & Design
Solid Gear Construction
The replacement gears feel sturdy and well-machined. They are designed to match the original Whirlpool specifications, helping ensure:
-
Proper alignment
-
Smooth power transfer
-
Reduced vibration
Food-Grade Grease Included
Many DIY repair kits skip this step—but lubrication is critical.
The included 1.8 oz food-grade grease ensures:
-
Quiet operation
-
Reduced friction
-
Longer lifespan of internal parts
✅ No need to buy grease separately
✅ Safe for kitchen appliances
Installation Experience (DIY-Friendly)
This kit is well-suited for DIY repair, even if you’re not a professional technician.
Typical steps:
-
Unplug the mixer
-
Remove the housing screws
-
Clean out old grease and debris
-
Replace worn gears, bearing, gasket, and circlip
-
Apply new food-grade grease
-
Reassemble and test
⏱ Estimated time: 45–90 minutes
You’ll need basic tools (screwdrivers, snap-ring pliers) and a bit of patience, but no special equipment.
👉 Check compatibility and kit details on Amazon
Performance After Repair
Once installed correctly, users typically notice:
✅ Attachments spin smoothly again
✅ No more grinding or slipping sounds
✅ Consistent power under load
✅ Mixer feels “like new” during normal use
This kit restores the mechanical connection between the motor and attachments, which is often all that’s needed.
Pros & Cons
Pros✅
✅ Complete kit (not just one gear)
✅ Compatible with Whirlpool 5Qt & 6Qt mixers
✅ Includes food-grade grease
✅ Cost-effective alternative to replacement
✅ DIY-friendly for most users
Cons❌
⚠ Requires opening the mixer (not for everyone)
⚠ Not universal for all stand mixer brands
⚠ Old grease cleanup can be messy
Who Should Buy This Kit
Recommended for:
-
Whirlpool 5Qt or 6Qt stand mixer owners
-
Mixers that run but don’t spin properly
-
DIY-minded homeowners
-
Anyone wanting to extend appliance lifespan
-
Budget-conscious kitchen users
Not ideal for:
-
Mixers with burnt motors
-
Users uncomfortable with DIY repairs
-
Non-Whirlpool models
-
Mixers with cracked housings or electrical issues
Helpful Tips Before You Start
✅ Take photos during disassembly
✅ Label screws to avoid confusion
✅ Clean old grease thoroughly
✅ Apply grease evenly—don’t overpack
✅ Test mixer at low speed first
These small steps can prevent rework and ensure smooth operation.
Final Verdict – Small Parts, Big Savings
The Whirlpool Stand Mixer Worm Gear Kit is an excellent solution for one of the most common stand mixer failures. Instead of replacing an expensive appliance, this kit allows you to fix the real problem and restore full functionality.
For anyone comfortable with basic DIY repairs, this kit offers strong value, solid performance, and long-term reliability.
👉 Get the Whirlpool Stand Mixer Worm Gear Kit here